Surface Mount Technology (SMT): The technology of processing bare PCB boards and mounting electronic components on the PCB board. This is the most popular electronic processing technology nowadays with electronic components are getting smaller and a trend to gradually replace DIP plug-in technology. Both technologies can be used on the same board, with the thru-hole technology used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.
An SMT component is usually smaller than its thru-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.
Special features:
>High speed pick & place machine set up for all small,median to large run SMT assembly (SMTA).
>X-ray inspection for high quality SMT Assembly (SMTA)
>The assembly line placing accuracy +/- 0.03 mm
>Handle large panels up to 774 (L) x 710 (W) mm in size
>Handle components size to 74 x 74, Height up to 38.1 mm in size
>PQF pick & place machine give us more flexibility for small run and prototype board build up.
>All the PCB assembly (PCBA) followed by IPC 610 class II standard.
>Surface Mount Technology (SMT) pick and place machine give us the capability to working on Surface Mount Technology (SMT) component package smaller than 01 005 which is 1/4 size of 0201 component.
